Intelligent lighting control

esave - Intelligent perception of our environment

Optional sensors extend the functionality of the esave control system and enable situation-dependent lighting. Motion sensors in each luminaire enable targeted use of light where and when it is needed.

For example, luminaires on a bike and pedestrian path can provide light for pedestrians and cyclists throughout the night without wasting energy the rest of the time. A brightness sensor can replace or supplement a ring control. The optionally integrated GPS receiver supplies the entire system with time and date information so that the luminaires can be controlled to the minute.

Advantages of the stand-alone solution with additional sensors
  • One-time purchase costs, no further license fees for the software and the USB Dongle. 
  • Automatic, regular updates
  • Data is stored in the luminaire, thus no permanent internet connection is required. 
  • The system can be operated by the municipality itself. 
  • Energy savings of over 90%. 
  • The luminaires can be configured with an individual dimming profile according to time, brightness, and movement
  • More convenience and safety in the municipality
     
esave Built-In Solution

Fixed lighting control products, which are required

USB Dongle

SLC-AC or DC

Antenna and Cable

Additional products for intelligent lighting control

PIR Motion Sensors

PIR motion sensor is based on the passive infrared technology. It detects motions as a result in the differences of the surrounding temperatures.

Read more

esave LightRadar

LightRadar Sensor is an object-tracking system that uses radar technology to characterize a motion of an object.

Read more

esave SLC-Box Brightness

­The SLC-Box Brightness is equipped with an SLC-AC Controller, Brightness Sensor and a mast bracket, that allows easy installation in many different situations. Due to the integrated brightness sensor, the light can be switched on or off depending on the set brightness value.

If desired, the brightness sensor can also be ordered without SLC box.

esave SLC-AC or DC GPS

The Street Light Controller GPS is as compact as the SLC-AC or DC device. It can also be easy embedded in any LED street light and used with all major electronic control equipment. A GPS receiver provides the entire system with time and date information. 

Read more

If the customer does't want a second antenna on the luminaire, the SLC box Brightness can be equipped with a GPS controller.

Required Antennas

  • GPS Antenna
  • Rod Antenna and Antenna Cable

An additional GPS antenna must be mounted for the GPS controller to receive the GPS signal. The time and date information will be distributed via the automatically organizing 2.4 GHz mesh network. Therefore, the rod antenna and the antenna cable are also required. 

esave Zhaga Solution SLC-Hub

Fixed lighting control products, which are required

USB Dongle

SLC-Hub

Additional products for intelligent lighting control

SLC-Hub GPS

The SLC Hub GPS has the same functions as the SLC Hub. He also can be operated in combination with any luminaire equipped with the Lumawise Endurance S socket. It was additionally equipped with a GPS receiver. 

Read more

 

PIR Zhaga Sensor ST or HS

PIR Zhaga sensors is a solution for the intelligent control of outdoor public lighting, which allows  to convert a conventional system into a smart connected lighting system. 

Read more

The PIR Zhaga Sensor is not D4i Ready and pin 4 of the Zhaga connector must be connected.

esave Zhaga Solution SLC-Motion

Fixed lighting control products, which are required

USB Dongle

Additional products for intelligent lighting control

SLC-Motion ST or HS

The new SLC-Motion enables an easier implementation of the smart solution. Like its predecessors, the SLC-Hub and PIR5 Zhaga Sensor, it was designed for the Zhaga interface and can be attached to the luminaire within a few seconds. 

Read more

esave Solutions

Stand-Alone: Fixed light control
Cloud-based: Remote controlled lighting